Kaspersky Rescue Disk 10.0.20.1

Kaspersky Rescue Disk descriptio Boot from the Kaspersky Rescue Disk to scan and remove threats from an infected computer without the risk of infecting other files or computers

Burn this ISO image to a CD, insert it into the infected system's CD-ROM drive, enter the PC's BIOS, set it to boot from the CD and reboot the computer

This lists the Gentoo-specific options, along with a few options that are built-in to the kernel, but that have been proven very useful to our users.

Also, all options that start with "do" have a "no" inverse, that does the opposite. For example, "doscsi" enables SCSI support in the initial ramdisk boot, while "noscsi" disables it.

Hardware options

acpi=on - This loads support for ACPI and also causes the acpid daemon to be started by the CD on boot. This is only needed if your system requires ACPI to function properly. This is not required for Hyperthreading support

acpi=off - Completely disables ACPI. This is useful on some older systems, and is also a requirement for using APM. This will disable any Hyperthreading support of your processor.

console=X - This sets up serial console access for the CD. The first option is the device, usually ttyS0 on x86, followed by any connection options, which are comma separated. The default options are 9600,8,n,1

dmraid=X - This allows for passing options to the device-mapper RAID subsystem. Options should be encapsulated in quotes.

doapm - This loads APM driver support. This requires you to also use acpi=off

dobladecenter - This adds some extra pauses into the boot process for the slow USB CDROM of the IBM BladeCenter

dopcmcia - This loads support for PCMCIA and Cardbus hardware and also causes the pcmcia cardmgr to be started by the CD on boot. This is only required when booting from a PCMCIA/Cardbus device

Click here to download

Posted in Anti virus